error messages
out of paper message
if the in tray or optional lower tray contains paper
1. Verify the following:
❍
There is sufficient paper in the paper tray (at least ten sheets).
❍
The paper tray is not overly full.
❍
The paper stack is touching the back of the paper tray.
2. Slide the paper guides so they fit
firmly
against the edges of the paper.
3. Press the
Resume
button to continue printing.
if the in tray or optional lower tray is empty
1. Load paper in the tray.
2. Press the
Resume
button to continue printing.
the error message 'there was an error writing to USB port' appears
If you are using a USB printer cable, the printer may not be receiving correct data from
another USB device or USB hub. Connect the printer directly to the USB port on the
computer.
the error message 'there was an error writing to LPT1' appears
If the printer is connected to the computer with a USB cable, the cable may not have been
attached before installing the software.
Uninstall, then reinstall, the software.
To uninstall the software, click
here
.
the error message 'two-way communication cannot be established' or 'printer not
responding' appears
The printer may not be able to communicate with the computer if the USB cable is too long.
If you receive this error message, ensure the USB cable is not greater than five meters
(approximately 16 feet, five inches) in length.
printer assistant home
back
search
exit
uninstall software